Re: Routing with PM2e

John G. Thompson (jgt10@livingston.com)
Tue, 8 Oct 1996 19:38:47 -0700 (PDT)

On Tue, 8 Oct 1996, PM Mailing List wrote:
>
> To accomplish this let me try this out on you:
>
> --- Radius Table Setup: -----
>
> custisdn Password = "password"
> User-Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = 192.168.1.1,
> Framed-Netmask = 255.255.255.252,
> Framed-Route = "208.100.88.0 192.168.1.1 1",
> Framed-Compression = Van-Jacobsen-TCP-IP,
> Framed-Filter-Id = "std.ppp",

Unless you are actually filtering you don't need the filter-id line.

> Framed-MTU = 1500
>
> ---- end of Radius Table Setup: ---
>
> Do I also need to add static routes and or masks in the portmaster it's self?
> like: add route 208.100.88.0 192.168.1.1 1
> add table netmask 192.168.1.0 255.255.255.252
>
> Or will the radius entry take care of everything?

The Frame-Route inthe radius entry will handle the network. You can add
the netmask if you really want to lock the 192.168 network down that small.
I'd set it to a class C netmask if anything.

JGT

--
John G. Thompson      Livingston Enterprises Inc.    Phone: (800) 458-9966
JOAT(MON)             6920-220 Koll Centre Pkwy.       Fax: (510) 426-8951
support@livingston.com Pleasanton, CA 94566      http://www.livingston.com