I took the sims out and re-seated them, same thing.
Then I removed the new simms and put the old 256's
in, and it worked.
Next I took the 256's out and put one 1 meg simm
in, booted up and the system led went solid again.
I repeated this with the three remaining simms,
with the same results.
I actually got 8 of these simms and put 4 of them
in another pm2e with 30 analog ports, it worked
like a champ. I would try swapping those simm's
out, but it will have to wait untill early in the
AM, when the user load is light or none.
Does anyone have any other suggestions, besides
swapping the others out? The OS on both is 3.3.1.
Any comments are welcome. Thanks,
-- Brian Lofurno brian@dplus.net DataPlus TrueNet (www.dplus.net) 610-429-8300