Chuck
On Mon, 14 Oct 1996, Brian Moore wrote:
> I'll freely admit to not grokking all the nuances of telephony. (But if you
> need some C or Perl hacks, now that's my cup of tea.. or even more fun, my old
> love, Z80 Assembly.... :))
>
> I am seeing some HUGE numbers for Frame Errors, damned near nothing for CRC
> errors, a huge number of Abort Errors...
>
> Should I scream bloody murder to MCI? The CSU's (Kentrox Data Smarts) don't
> seem to notice most of the problems, but eventually protocol stops running
> down the line until the W1 port is reset (which means I make a long distance
> call to the far end if I'm home, or unplug the line long enough to make a red
> alarm if I'm here, which will reset W1 with no long distance charge, but sorta
> screws up the stats the DataSmart keeps.
>
> And my router has a more creative name.. though the PM's need better names.
>
>
> > Call your telco immediately. Chances are also that your CSU/DSU (if it is
> > a T1) has recorded some errors such as errored seconds and code-violations.
> > It might be a bad repeater in their system or a CO problem.
> >
> > You need a more creative name than irx1 also.
> >
> > >
> > > Can someone tell me if there is any software out there to determine
> > > where these CRC errors are coming from. I have done everything short of
> > > buying all new hardware. I have replaced the cables already and the 2
> > > units worked fine before I changed over to the IRX-114.
> > >
>
>