Bob
At 05:24 AM 10/17/96 -0400, you wrote:
>
>> Sorry for sending this twice, but I forgot the subject line on my previous
>> e-mail.
>>
>> We're using Livingston Portmaster PM2Es with their 5 port BRI modules to
>> handle several remote locations that connect from Pipeline 50s or Pipeline
>> 130s. We recently upgraded several of the pipes to 4.6C.
>>
>> Suddenly we're experiencing random TCP/IP session lockups every 5 - 10
>> minutes, which can only be resolved by dropping the connection and
>> redialing. During the lockups we can ping the remote router, but telnet
>> attempts or any other activity on their end are unsuccessful. This occurs
>> with either 1 or 2 channel connections. We've tried configuring the pipes
>> for MP or MPP with no effect. Pre 4.6 pipes are humming along fine.
>>
>> Has anyone on this list experienced similar problems? Does anyone have a
>> handle on what may be causing this problem? Anyone from Livingston care to
>> comment? BTW, I'm also posting this question to the ascend user's
mailing list.
>>
>
>
>
>Also to add to this (I am using P130 myself) the P130 appears to think it
>actually has a connection, so it doesn't try and dial again which is very
>annoying! The interesting thing is that when talking to another Ascend
>this doesn't happen, but when talking to the Livingston it does. Strangely
>enough I would say it's an Ascend problem, but why only when talking to a
>Livingston 5BRI card.. Go Figure...
>
>
>
>-------------------------------------------------------------------------------
>Internet : howardl@abs.net | Howard D. Leadmon
>UUCP : wb3ffv!howardl | ABSnet Internet Services
>PHONE : (410)-361-8160 | 200 E. Lexington Street
>FAX : (410)-361-8162 | Suite-1602
>PACKET : WB3FFV @ WB3FFV.MD.USA.NA | Baltimore, MD 21202
>WWW : http://www.abs.net |
>
>
>
-------------------------
Robert M. Zachok, Atlantic Internet Technologies
rmz@exit109.com 628 Shrewsbury Ave.
(908) 758-0505 Red Bank, NJ 07701