Windows 95 problems

Bryan Wann_Stigler_ISP (bcasey@galaxy.galstar.com)
Sat, 19 Oct 1996 23:23:56 -0500 (CDT)

I've got a user that is having problems getting Windows 95 to connected.
They were connecting fine, but changed modems (supposedly) and when they
would try to connect, it would connect, and immediately disconnects them.
I went over everything, and it is our reccomended config, only TCP/IP is
selected.

pm1-stigler.cwis.net>
Sending LCP_CONFIGURE_REQUEST to port S6 of 24 bytes containing:
01 01 00 18 02 06 00 00 00 00 05 06 3a 5e a7 db
07 02 08 02 03 04 c0 23
Received LCP_CONFIGURE_ACK on port S6 of 20 bytes containing:
02 01 00 18 02 06 00 00 00 00 05 06 3a 5e a7 db
07 02 08 02 03 04 c0 23
Received LCP_CONFIGURE_REQUEST on port S6 of 19 bytes containing:
01 03 00 17 02 06 00 0a 00 00 05 06 00 28 f8 7e
07 02 08 02 0d 03 06
Sending LCP_CONFIGURE_REJECT to port S6 of 7 bytes containing:
04 03 00 07 0d 03 06
Received LCP_CONFIGURE_REQUEST on port S6 of 16 bytes containing:
01 04 00 14 02 06 00 0a 00 00 05 06 00 28 f8 7e
07 02 08 02
Sending LCP_CONFIGURE_ACK to port S6 of 20 bytes containing:
02 04 00 14 02 06 00 0a 00 00 05 06 00 28 f8 7e
07 02 08 02
S6: LCP Open
Received PAP_AUTH_REQ on port S6 of 23 bytes containing:
01 01 00 17 0b 74 77 72 69 67 68 74 2e 70 70 70
06 78 78 78 33 31 38
Sending PAP_AUTH_ACK to port S6 of 20 bytes containing:
02 01 00 14 0f 4c 6f 67 69 6e 20 53 75 63 63 65
65 64 65 64
Sending IPCP_CONFIGURE_REQUEST to port S6 of 16 bytes containing:
01 01 00 10 02 06 00 2d 0f 00 03 06 cf 0d 6e fe

Received LCP_PROTOCOL_REJECT on port S6 of 18 bytes containing:
08 05 00 16 80 21 01 01 00 10 02 06 00 2d 0f 00
03 06 cf 0d 6e fe
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This puzzles me. What would their computer be rejecting? Is this trying
to specify an IP address?

----------------------- Current Status - Port S6 ---------------------------
Status: IDLE
Input: 25431042 Parity Errors: 0
Output: 172027685 Framing Errors: 93
Pending: 0 Overrun Errors: 0
Modem Status: DCD- CTS+

Active Configuration Default Configuration (* = Host
-------------------- --------------------- Can Override)
Port Type: Login/Netwrk Login/Netwrk (Dial In) (Security)
Login Service: PortMaster PortMaster
Baud Rates: 115200 115200,115200,115200
Databits: 8 8
Stopbits: 1 1
Parity: none none
Flow Control: RTS/CTS No Xon/Xoff*,RTS/CTS
Modem Control: on on
Hosts: odyssesy default

Terminal Type: vt100
Login Prompt: login:
Idle Timeout: 30
Login Message:
pm1-stigler S6
Welcome to CWIS Internet Services! You may now log in.
For assistance or to report problems, please call 918-967-2858 (Voice)
Options: PPP - yourusername.ppp Shell account - yourusername

Dial Group: 0
Modem: 0x30 Flow: 0x24
Last 60 Recvd: ontent-type: application/x-www-form-urlencoded\r\nConten\r\nOK\r\n
uptr = 0x11dd60 iptr = 0x11dd66 strt = 0x11dd60 pop = 5 push = 5
fifo = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Session termination history:
0 min - User Request - PPP Term Ack
1 min - User Request - PPP Term Ack
pm1-stigler.cwis.net>
pm1-stigler.cwis.net>