> I added 10 ports to a 20 port portmaster. I added host names to
> the 10 new IP address that the portmaster would add to the IP pool since
> there are 10 new ports. The portmaster assigns the new IP address fine,
> but no hostnames. I have used nslookup, and the hostnames are there.
> This causes problems when customers use mirc and telnet, they have to
> manually enter the host name depending upon the IP address they get.
> Any Ideas what I did wrong?
Did you also put reverse DNS entries in for the hostnames?
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
Patrick Greenwell (510) 943-5769 voice
Systems Administrator (510) 210-2000 modem
Value Net, Inc. (510) 943-1708 fax
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/