re: Office Router to Portmaster over ISDN

Charles Scott (cscott@freeway.net)
Mon, 2 Dec 1996 14:58:15 -0500 (EST)

Shane:
I don't know if this will help you out or not, but we did find that if
we were making the calls as voice calls that the ports had to be set to
56000, even though the documentation says that's informational only.
Also, we've had problems with various things connecting to our ISDN lines
when the PortMaster ports are "set host prompt". Something to look at in
any case.

Chuck

> At 03:30 AM 12/1/96 -0500, you wrote:
> >I am having a miserable time trying to get our office router to connect
> >to our portmaster with a 5BRI module installed. I am using com os
> >v3.3.3 on the portmaster and com os vOR 3.4.2Lc1.
> >
> >I have established a user on the portmaster and a location on the
> >officerouter. I can get the office router to dial over 1 64K B
> >Channel. It will connect with the portmaster, the portmaster will show
> >the user on the port BUT it will stay at the connecting point and never
> >establish. I have watched the debug mode from both ends and see an lot
> >of garble going by, ending with a failed connection. I have even tried
> >having the portmaster dial the OR and am getting the same problem.
> >
> >I am desperately in need of help, anyone with suggestions will be
> >welcomed and praised. I can be reached via email at sdixon@ctol.net or
> >info@ctol.net.
> >
> >Shane Dixon
>