>Try setting:
>
>set console
>set debug 0x51
>
>also
>
>set debug isdn might be helpful.
Well, I have tried to use both of these commands to troubleshoot
my PM, but all I have got were the three lines you can see on the
end of my original message.
Alexander
--------- original message ----------------
> I recently had my local phone company to put mu ISDN numbers into a
hunt
> group. It seems the hunting is working in a sense that the call is being
> routed from s10 to s11, but the connection can not be established. I
> have on my premises PM2-ER with ISDN card. On the other end I have 2
> clients with Pipeline 130 and 75 respectively. When one of my clients
> has established connection to s10 (published number) and the other
> client tries to establish the connection, the call is rejected.
>
> Here is the log:
>
> S11: Sending Request Connect - 64Kbps / Data
> S11: Received Disconnect Ack Call Rejected
> S11: Received Call Clear
>
> Can anybody help me with an advice?