The PM is sending a request and not hearing back in time. But RADIUS got
it. So by the time the PM gets the reply it has sent multiple requests.
Since RADIUS saw it and dealt with it, it drops the duplicate requests.
>That PM2eR is running ComOS 3.3.3 as are my other two PM's (which work
>fine with Radius 2.0). The only difference is that only PM3 is a remote
>POP, the other two are on the same ethernet as the radius server. It
Being on a remote POP could be the issue. If the link is saturated it
would cause a delay. It could also be a routing issue.
I don't suspect RADIUS because if the server was too slow it would be too
slow for ALL 3 PMs.
-MZ
-- Livingston Enterprises - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 4464 Willow Road, Pleasanton, CA 94588