Re: Radiusd probs

John G. Thompson (jgt10@livingston.com)
Fri, 6 Dec 1996 17:22:02 -0800 (PST)

On Fri, 6 Dec 1996, Brian Kramer wrote:
>
> I've got a call into support, but I bet I'll find help here faster.

Nope. I'm part of that tech support.

> 3 pm2e, 1 pm3
>
> The 3 pm2e's work fine with the radius..I can login no problem.
> With the new pm3 I can't login unless the user in is the pm3's user file.
>
> I've checked the following:
>
> secret key
> radiusd -x show the ack
> the ptrace on the pm3 shows something coming back
> But I just get another login prompt.
>
> What can this be?
>
> The same radiusd server works fine with the 3 other pm2e's.

What are the IP addresses and netmasks of the PM2Es, the PM3 and the
radius server. Also, is the radius server doing virtual IP addresses or
secondary network addresses?

What does the ptrace show for the UDP packet coming back from the radius
server? Is the address in the ptrace the same as the radius address that
you set and shown in the 'sh gl'?

Is the PM3s IP address in the radius clients file? Has the radius deamon
been -HUP'd or restarted since you made that change?

Hope that helps!

JGT

--
John G. Thompson       Livingston Enterprises Inc.    Phone: (800) 458-9966
JOAT(MON)              4464 Willow Road                 Fax: (510) 426-8951
support@livingston.com Pleasanton, CA 94588      http://www.livingston.com