Re: PM3 w/PRI T-1 configuration? (fwd)

MegaZone (megazone@livingston.com)
Tue, 10 Dec 1996 18:47:55 -0800 (PST)

Once upon a time Justin B. Harvey shaped the electrons to say...
>OK, if I have a remote site and if they're setup on a T1 D4/AMI circuit, I
>can easily plug the RJ45 on this end into the PM3 and route a full T-1
>over the WAN for data right?

Yes. Right now you can use the T1/PRI ports to route a full-T1, frac-T1, or
channelized-T1 using PPP or Frame Relay over leased lines.

BTW, check your system clock - unless you really are on the other side of the
date line...

-MZ

--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588