On Tue, 10 Dec 1996, MegaZone wrote:
> Once upon a time Justin B. Harvey shaped the electrons to say...
> >OK, if I have a remote site and if they're setup on a T1 D4/AMI circuit, I
> >can easily plug the RJ45 on this end into the PM3 and route a full T-1
> >over the WAN for data right?
>
> Yes. Right now you can use the T1/PRI ports to route a full-T1, frac-T1, or
> channelized-T1 using PPP or Frame Relay over leased lines.
>
> BTW, check your system clock - unless you really are on the other side of the
> date line...
>
> -MZ
> --
> Livingston Enterprises - Chair, Department of Interstitial Affairs
> Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
> For support requests: support@livingston.com <http://www.livingston.com/>
> Snail mail: 4464 Willow Road, Pleasanton, CA 94588
>
>