Re: PM3 Modems

Roy (garlic@garlic.com)
Fri, 20 Dec 1996 09:44:38 -0800

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Kevin Fink: "Re: ESVA radius and Radius 2.0"
Previous message: John G. Thompson: "Re: BSpro can't connect"
Maybe in reply to: Dave Berzins: "PM3 Modems"

Dave Berzins wrote:
>
> At 07:57 AM 12/20/96 -0800, you wrote:
>
> >We had a meeting with engineering right around the PM3 release and they
> >told us that you should NEVER get a 'RINGING' on a PM3. In the PRI
> >signalling there is a command that tells the telco switch to tell the far
> >end switch to send the 'RINGING' sound to the customer. The PM3 never
> >sends that command, it just tells the switch to connect the call.
>
> Well for christ's sake... I want it to ring!
>
> Dave...

I just dialed into an Ascend 4004 and it didn't ring. I got a burst
of tone and then standard modem answer sequence.

I find nothing wrong with that. Why waste time with a ring signal
that has no bearing on anything

Roy

Next message: Kevin Fink: "Re: ESVA radius and Radius 2.0"
Previous message: John G. Thompson: "Re: BSpro can't connect"
Maybe in reply to: Dave Berzins: "PM3 Modems"