The Config guide is a general overview.
The Command Line guide is meant for command line specifics.
The X-Windows PMconsole guide is still pending unfortunately, sorry.
>PMconsole and ComOS commandline? Why can't I do things like "show
>routing" to see what I have routing set to?
You can get picky with things like that. That is too specific a command to
implement. It isn't generally useful.
If you want to know how routing is set on an interface, show the interface
or use 'ifconfig' for a list.
>With routing set to on, will the PM advertise via RIP any connected or
>routed address? i.e.
yes.
>routeme Password = "UNIX"
> User-Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Port-Limit = 2,
> Framed-Route = 192.168.100.0 0.0.0.0 1
That Framed-Route is bogus, you need quotes around the values.
>When routeme connects, will the PM advertise via RIP that it is the
>gateway for 192.168.100.0/24? I'd hate to have to add a static route to
yes.
>Will the PM also advertise assigned addresses? Currently, I have static
Yes, I believe it does.
-MZ
-- Livingston Enterprises - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 4464 Willow Road, Pleasanton, CA 94588