Re: BSpro can't connect (fwd)

Simon Nuthall (simon@livingston.com)
Sun, 29 Dec 1996 12:14:12 -0800

Isn't this one of the routers Cisco bought out the rights to from Combinet?
Please respond to me directly. If so, I may have some good help for you.

Simon

----------
> From: Jukka Pakkanen <jukka.pakkanen@qnet.fi>
> To: support@livingston.com
> Cc: MegaZone <megazone@livingston.com>; portmaster-users@livingston.com
> Subject: Re: BSpro can't connect (fwd)
> Date: Sunday, December 29, 1996 5:00 AM
>
> Joe Portman wrote:
> >
> > On Fri, 27 Dec 1996, MegaZone wrote:
> >
> > > Once upon a time Jon Lewis shaped the electrons to say...
> > > >Great. Perhaps if the secret decoder ring were built into the PM,
things
> > > >would have been a bit clearer.
> > >
> > > That's what Chapter 19 is for.
>
> We have a small problem with Cisco 751 and PM3, they donīt like each
> other.
>
> Using chapter 19 I can pretty much see what is going on,
> but I havenīt actually figured out what goes wrong yet...
>
> Both devices are set to use PAP,
> and CHAP is disabled in PM3.
> This is the trace, any idea?
>
> S1: Sending Request Connect - 64Kbps / Data (B2
> ID:bfa)
> S1: Received Connect -
> B2
> Received LCP_CONFIGURE_REQUEST on port S1 of 27 bytes
> containing:
> 01 01 00 1f 01 04 05 f2 03 04 c0 23 05 06 d8
> db
> 21 12 07 02 08 02 13 09 03 00 40 f9 09 82
> 66
> Sending LCP_CONFIGURE_NAK to port S1 of 9 bytes
> containing:
> 03 01 00 09 03 05 c2 23
> 05
> Sending LCP_CONFIGURE_REQUEST to port S1 of 14 bytes
> containing:
> 01 01 00 0e 05 06 db 5d b5 1e 03 04 c0
> 23
> Received LCP_CONFIGURE_REQUEST on port S1 of 23 bytes
> containing:
> 01 02 00 1b 01 04 05 f2 05 06 d8 db 21 12 07
> 02
> 08 02 13 09 03 00 40 f9 09 82
> 66
> Sending LCP_CONFIGURE_ACK to port S1 of 27 bytes
> containing:
> 02 02 00 1b 01 04 05 f2 05 06 d8 db 21 12 07
> 02
> Received LCP_CONFIGURE_NAK on port S1 of 8 bytes
> containing:
> 03 01 00 0c 01 04 05 f2 07 02 08
> 02
> Sending LCP_CONFIGURE_REQUEST to port S1 of 14 bytes
> containing:
> 01 02 00 0e 05 06 db 5d b5 1e 03 04 c0
> 23
> Received LCP_CONFIGURE_NAK on port S1 of 8 bytes
> containing:
> 03 02 00 0c 01 04 05 f2 07 02 08
> 02
> Sending LCP_CONFIGURE_REQUEST to port S1 of 14 bytes
> containing:
> 01 03 00 0e 05 06 db 5d b5 1e 03 04 c0
> 23
> Received LCP_CONFIGURE_NAK on port S1 of 8 bytes
> containing:
> 03 03 00 0c 01 04 05 f2 07 02 08
> 02
> Sending LCP_CONFIGURE_REQUEST to port S1 of 14 bytes
> containing:
> 01 04 00 0e 05 06 db 5d b5 1e 03 04 c0
> 23
> Received LCP_CONFIGURE_ACK on port S1 of 10 bytes
> containing:
> 02 04 00 0e 05 06 db 5d b5 1e 03 04 c0
> 23
> S1: LCP
> Open
> Received LCP_TERMINATE_REQUEST on port S1 of 0 bytes
> containing:
> 05 03 00
> 04
> Sending LCP_TERMINATE_ACK to port S1 of 4 bytes
> containing:
> 06 05 00
> 04
> S1: Sending Disconnect
> Request
> S1: Received Clear Conf Normal Clearing (B2
> ID:bfa)