> I have a pair of pm3's here that I'm trying to get ospf up and running on.
> So far
> the results have not been good, the routers do the exact same thing if ospf
> is enabled.
> If ospf is off, they work fine.
>
> Rouer Boots, within 30 sec it hangs. then in a nother minute or so the router
> reboots and gives the following error on the console.
>
> PANIC: Watchdog Timer - IP: 150793
> REGS: 01DD8274 0048A010 FFFFFFFF 01F95F60
> 001BD698 001BDCD4 15555553 001BD65C
>
> Stack Trace:
> 195b4e (1b0008, 283, 48a010, 0, ffffffff, 1bdcd4, 23e, 1bdce8)
> 150793 (40bd30, 1bdcd4, 1bdcd4, 0, ffffffff, 411c44, 200, 2a)
> 14e37e (40e12c, 411c44, 2a, 5c0, 2a, 40e12c, 14, 1bd700)
> 14e1e9 (411c44, 2a, 5c0, cc8b0907, cc8b091a, 40d784, 40e12c, 5c0)
> 14da0c (1b8248, 2a, 5c0, cc8b0907, cc8b091a, 40d784, 800, 3200)
> 19d2ea (1b8248, 40d784, 5d8, 0, 32, 40c304, 1bd820, 4)
> 1a0728 (40c304, 1bf970, 200, 1, b, 0, 38)
> 1a02be (40c304, 40, 375)
> 1a6d1c (1f4, 1592bb)
> 1592f6 ()
> ff1b2 ()
>
>
> They will do this repeatedly until ospf is disabled. Memory usage on the
> router is
> over 3megs when this happens.
>
> Any idea's or help here would be aprecated, I need to deply these routers
> with ospf
> on thursday.
>
> Jim McKenzie
> mcs@isp.net
>
>
>
What version of ComOS? (always, always, always include versions in
trouble reports becasue it first thing support@livingston.com needs).
Have you tried erasing the flash and reloading the firmware? Probably
should put comos 3.5c2 on it...
Tom