Can't you get a CSU to provide clocking? if so you may be able to do PM3 -
CSU - Telco - PM3. The PM3 - CSU cable will have to be crossed. You can
have multiple CSU's on a T1. The telco will only be able to loop the
first in the series.
-Matt
> So on a point to point then you cant have PM3 at each end because the the
> telco(PacBell) says on point to point circuits they dont provide any clock.
>
> Does this sound right to you ?
> Thanks
> Rick
> At 11:55 PM 5/3/97 -0700, you wrote:
> >Once upon a time Rick Wagner shaped the electrons to say...
> >>When hooking up a Point to point T-1 on a PM3 how do you set the clock
> >>source ?
> >
> >The clock MUST be external for all of our units, so we simply look for
> >it on the line.
> >
> >-MZ
> >--
> >Livingston Enterprises - Chair, Department of Interstitial Affairs
> >Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
> >For support requests: support@livingston.com <http://www.livingston.com/>
> >Snail mail: 4464 Willow Road, Pleasanton, CA 94588
> >
> >
> >
>
-- ---------------------------------------------------------------------- Matthew S. Crocker - Systems Administration matthew@crocker.com Crocker Communications Phone: (413) 587-3350 PO BOX 710 Fax: (413) 587-3352 Greenfield, MA 01302-0710 http://www.crocker.com ----------------------------------------------------------------------