Could someone decipher an isdn prnt-scrn?

Rick Osteen (rosteen@1eagle1.com)
Mon, 05 May 1997 04:24:28 +0000

I see that everthing is normal except the abort,crc,and frame errors.
When I get to this screen, I've already attached to it and have done an ath
and it returns an "Ok" then I do a reset s18 and it then changes from
"No-Service" to "idle".
Since the upgrade(from 3.3.3 to 3.5), I have had less problems but this one
on this port is giving me more problems.
Any ideas out there?
Rick
ps. there are two printscreens

sho s18
--------------------- Current Status - ISDN Port S18 ------------------------
Status: IDLE
Input: 1038558 Abort Errors: 2691
Output: 2037727 CRC Errors: 1
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 18897
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect: Temporary Failure

Active Configuration Default Configuration (* = Host
-------------------- --------------------- Can Override)
Port Type: Login/Netwrk Login/Netwrk (Dial In) (Security)
Login Service: PortMaster PortMaster
Line Speed: 64000 64000
Hosts: default

Terminal Type:
Login Prompt: login username:
SPID: 014960114001
Directory No: 4960114
Dial Group: 0
LIV-IDT>

2nd screen;

LIV-IDT> sho isdn
D Ports State Change Start Up Down Time Sess In Out Err
-- ------- --------- ------ ----- ----- ----- ----- ------ ------- ------- ----
5 S10/S11 Active 3days 2 2 0 0 7 71721 71732 0
7 S14/S15 Active 3days 2 2 0 0 1 68152 68153 0
8 S16/S17 Active 3days 2 2 0 0 2 73665 73623 0
9 S18/S19 Initial 0 2300 203 3046 1562 44 62627 62893 2520
LIV-IDT>