Re: Bay router to pm2er via frame relay

Charlie Clemmer (cclemmer@BayNetworks.COM)
Mon, 19 May 1997 11:30:38 -0500

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Tim Hodges, Triangle Telephone Cooperative: "modem training failures across long distance"
Previous message: Michael J. Hartwick: "Re: Blocking outside ip's from an internal ip"
Maybe in reply to: Dave Sims: "Bay router to pm2er via frame relay"

At 11:28 AM 5/17/97 +0000, Dave Sims wrote:
>I have defined statis routes in the node routers also. A default
>route to 0.0.0.0 through x.x.1.1 (the PM2er) and a route to the
>x.x.0.0 network through the x.x.1.1 PM2er.
>
>The problem is that from the Bay router at x.x.2.1 I can not get to
>the internet or other nodes on the frame network. I can ping, trace,
>and telnet to the PM2er or ANY host on the x.x.0.0 network.

Have you defined an adjacent host entry on the Bay router, mapping the
PM2er's FR IP Address to the PVC?

Try adding the adjacent host, with the IP address of x.x.2.1 to the correct
PVC, and this should resolve your issue.

If not, drop me an email and we can pursue this further.

Charlie Clemmer
Bay Networks

Next message: Tim Hodges, Triangle Telephone Cooperative: "modem training failures across long distance"
Previous message: Michael J. Hartwick: "Re: Blocking outside ip's from an internal ip"
Maybe in reply to: Dave Sims: "Bay router to pm2er via frame relay"