Thanks
Wesley
On Mon, 19 May 1997, PortMaster User wrote:
> Let say I have PM2's S0/S1 connected to 555-1000 & 555-1001. It needs to
> call to 555-2000 & 555-2001 to create a 112K on-demand channel. I created
> a location with:
> Type: On Demand
> Destination: 192.168.1.1
> Protocol: PPP
> Option: Multi-Link
> Group: 0
> Max-ports: 2
> High Mark: 10 bytes
> V25bis script: "CRN5552000" "=DCD"
>
> When I have any traffic going over, PM2 dialout and connected at 64K at
> S0. When I do a "show all", PM2 shows S0 "Established" while S1
> "Connecting". I was ftping a huge file on the local network. I use an
> Ascend pipeline 50 on the other side and it was showing 100% of the line
> was utilized.
>
> When I did a "show s1" on the PM2, it shows "user busy" at the
> "disconnect" line. It looks like PM2 keep trying to call the same number
> 555-2000 to establish the 2nd B channal. Is there any way I can tell PM2
> to call 555-2001 to establish the 2nd channal? When I used another Ascend
> to call the Ascend, they allow me to enter 2 numbers and they could
> connect at 128K.
>
> Please help. Thanks
>
> Wesley
>
>