How to get PM2 to call the ISDN 2nd channel?

PortMaster User (pm@cetus.cetus.net)
Mon, 19 May 1997 22:38:26 -0400 (EDT)

Let say I have PM2's S0/S1 connected to 555-1000 & 555-1001. It needs to
call to 555-2000 & 555-2001 to create a 112K on-demand channel. I created
a location with:
Type: On Demand
Destination: 192.168.1.1
Protocol: PPP
Option: Multi-Link
Group: 0
Max-ports: 2
High Mark: 10 bytes
V25bis script: "CRN5552000" "=DCD"

When I have any traffic going over, PM2 dialout and connected at 64K at
S0. When I do a "show all", PM2 shows S0 "Established" while S1
"Connecting". I was ftping a huge file on the local network. I use an
Ascend pipeline 50 on the other side and it was showing 100% of the line
was utilized.

When I did a "show s1" on the PM2, it shows "user busy" at the
"disconnect" line. It looks like PM2 keep trying to call the same number
555-2000 to establish the 2nd B channal. Is there any way I can tell PM2
to call 555-2001 to establish the 2nd channal? When I used another Ascend
to call the Ascend, they allow me to enter 2 numbers and they could
connect at 128K.

Please help. Thanks

Wesley