can you take a moment and explain how to do that. we have it setup right
now to filter the guest account so it can't route out but I don't know how
to filter by called station id.
Sparky
-----Original Message-----
From: Kevin Wormington <kworm@sofnet.com>
To: Sparky <paulskol@burgoyne.com>; portmaster-users@livingston.com
<portmaster-users@livingston.com>
Date: Wednesday, March 03, 1999 12:40 PM
Subject: Re: (PM) Fw: Help
>If you are using PRI's you should be able to use the radius attribute
>called-station-id to only allow the guest user to access the 800 number.
If
>you are on CT1, then I don't think the called-station-id will work on the
>PM3.
>
>Kevin
>Sofnet, Inc.
>-----Original Message-----
>From: Sparky <paulskol@burgoyne.com>
>To: portmaster-users@livingston.com <portmaster-users@livingston.com>
>Date: Wednesday, March 03, 1999 12:11 PM
>Subject: (PM) Fw: Help
>
>
>>hi all,
>>
>>Long story so hang with me. We have a signup number that we use for new
>>accounts to call and download a file to configure their software. This is
>>an 800 number. We currently have it setup in radius to disconnect the
>>account (guest) after 5 minutes. The problem we are now running into is
>>some customers have found out what the number is and use it to dial up
with
>>all the time with their user name and password instead of the guest
>account.
>>Needless to say this makes for a rather large phone bill.
>>
>>What I need to know is there a way either through radius or on the PM's
>>themselves to configure it to kick anyone coming in on that number off
>after
>>5 minutes of connect time?
>>
>>Puzzled,
>>
>>Sparky
>>
>>
>>
>>-
>>To unsubscribe, email 'majordomo@livingston.com' with
>>'unsubscribe portmaster-users' in the body of the message.
>>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>