RE: (PM) PM3's CT-1's and ISDN Can it be done?

Mark Radabaugh (Mark@amplex.net)
Sun, 7 Mar 1999 22:23:42 -0500

> Can a PM3 with CT-1's handle ISDN calls from a CISCO 1600? Can a PM3
> with CT-1's handle ISDN calls period?
>
> Is anyone doing this, if so , how?
>
> jer

Yes a PM-3 will do ISDN 56K service, also known as DOVBS at 56K. See below:

pm3-1> sh line0
---------------------- line0 - T1 Inband DS0 ---------------

Status: UP Framing: ESF Encoding: B8ZS PCM: u-law

Signaling: Trunk E&M wink start

pm3-1> sh s3
--------------------- Current Status - ISDN Port S3 ------------------------

Status: ESTABLISHED
Input: 50144758 Abort Errors: 0
Output: 338682837 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS- TELCO+ Disconnect:

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Login/Netwrk (Dial In) (Security)
Line Speed: 56000 64000

Remote Host: WDV-1-dial47.amplex.net
Netmask: 255.255.255.255 0.0.0.0
Interface: ptp3 (PPP,Quiet,VJ-Comp)
Mtu: 1500 150
Dial Group: 0
Directory No:

Mark Radabaugh Amplex (419)833-3635
mark@amplex.net
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>