Here we go as for debug:
sendthem (VRA3308779194)
M15: mdp_allocate service 90
expect (=DCD=)
S40: Modem M15 connecting
M15: mdp_bind: (S40) dsl_id 1 ch_n 17 slot 22
M15: mdp2_activate: S40 ORIGINATE
M15: Default Modem Configuration: None
M15: mdp2_psm: RX 31200 TX 40000 ret 0 ren 0 =DCD=got it
S40: Chat Succeeded - Starting PPP
M15: mdp2_psm: RX 31200 TX 40000 ret 0 ren 1
M15: mdp2_psm -> MDP_STATE_DISCONNECT
M15: mdp_deactivate: from S40
M15: mdp_deactivate: port(S40) released
M15: mdp2_psm: INIT dp 5406 in_mbx 5412 out_mbx 5454
M15: mdp2_psm: DLOAD M15: mdp2_dload: EOF index 1ffc0 size 40000
MDP_STATE_OMC M15: mdp2_psm: READY M10: mdp2_psm: RX 28800 TX 45333 ret 0
ren 2
Thanks!
-Scott
> -----Original Message-----
> From: Thomas Kinnen [mailto:tkinnen@livingston.com]
> Sent: Monday, March 08, 1999 2:37 PM
> To: A PM3 User
> Cc: lista
> Subject: Re: (PM) Setting up a dial-back session from PM3 to WinNT &
> Win9x
>
>
> A PM3 User wrote:
>
> > I want to configure the PM3 so that it establishes dedicated
> connections to
> > Win NT and eventually Win9x boxes, I also want to set it up to allow for
> > call back scenarios in cases where a dedicated connection is not needed.
>
> Try a PPP debug when calling back and see where it is hanging.
>
> --
> Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>