To get a PPP debug, login to the PM and type the following:
set debug 0x51
set console
This will dump any PPP negotiation information to the telnet session.
Log this and send it to the list.
Chad Scott
Product Marketing Engineer
Lucent Technologies, Inc.
Remote Access Business Unit
-----Original Message-----
From: A PM3 User [mailto:pmuser@speedynet.net]
Sent: Monday, March 08, 1999 12:30 PM
To: Thomas Kinnen; A PM3 User
Cc: lista
Subject: RE: (PM) Setting up a dial-back session
from PM3 to WinNT & Win9x
Greetings again,
Here we go as for debug:
sendthem (VRA3308779194)
M15: mdp_allocate service 90
expect (=DCD=)
S40: Modem M15 connecting
M15: mdp_bind: (S40) dsl_id 1 ch_n 17 slot 22
M15: mdp2_activate: S40 ORIGINATE
M15: Default Modem Configuration: None
M15: mdp2_psm: RX 31200 TX 40000 ret 0 ren 0 =DCD=got it
S40: Chat Succeeded - Starting PPP
M15: mdp2_psm: RX 31200 TX 40000 ret 0 ren 1
M15: mdp2_psm -> MDP_STATE_DISCONNECT
M15: mdp_deactivate: from S40
M15: mdp_deactivate: port(S40) released
M15: mdp2_psm: INIT dp 5406 in_mbx 5412 out_mbx 5454
M15: mdp2_psm: DLOAD M15: mdp2_dload: EOF index 1ffc0
size 40000
MDP_STATE_OMC M15: mdp2_psm: READY M10: mdp2_psm: RX
28800 TX 45333 ret 0
ren 2
Thanks!
-Scott
> -----Original Message-----
> From: Thomas Kinnen [mailto:tkinnen@livingston.com]
> Sent: Monday, March 08, 1999 2:37 PM
> To: A PM3 User
> Cc: lista
> Subject: Re: (PM) Setting up a dial-back session from
PM3 to WinNT &
> Win9x
>
>
> A PM3 User wrote:
>
> > I want to configure the PM3 so that it establishes
dedicated
> connections to
> > Win NT and eventually Win9x boxes, I also want to
set it up to allow for
> > call back scenarios in cases where a dedicated
connection is not needed.
>
> Try a PPP debug when calling back and see where it is
hanging.
>
> --
> Thomas C Kinnen - <tkinnen@livingston.com>
<tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not
my employer's,
> unless they were given to me by my employer"
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the
message.
Searchable list archive:
<URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>