> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Steve Heaven
> Sent: Friday, March 05, 1999 11:03
> To: portmaster-users@livingston.com
> Subject:
>
>
>
> I have a PM3 fed with a PRI (E1) which has only 15 channels enabled.
> Can I use the remaining capacity for leased line connections?
>
> As far as I can see the 'set line0' command will only let me set either
> 'isdn' or 'fractional' for the whole line.
>
> Before I approach my Telco to see if they can feed both BRI B channels and
> channelised lines over the same E1, I thought I ought to make
> sure that the
> PM3 can handle it.
>
> Thanks
>
> Steve
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>