> On Wed, 10 Mar 1999, Chris Joyce wrote:
>
> >
> > Hi ,
> >
> > I'm still getting use to my PM3 and was wondering if I can / howto set it
> > so win95 clients can connect ppp and get there dns settings from the PM3 ?
> >
> > I've tryed to find some info on this but no luck so far and tips would be
> > good.
>
> Lots of helpful info given thus far, but I'll just summarize what I've
> done:
>
> 1) old win95 DUN was broken, it would grab first DNS server but not
> second, but we'll ignore this.
> 2) DNS servers must be set on the PMs
> 3) disable whatever is not necessary in DUN and network.
>
> quick run down on my over the phone setup.
>
> 1) go into DUN
[snip]
ugh forgot network settings...
control panel | network | tcp/ip
ip address is normally fine
wins configuration change to disable wins resolution
gateway should be completely blank
dns configuration disable dns
This is for dialin users ONLY and version of DUN! If they are on a
network also, then you MUST upgrade to DUN 1.2b or 1.3.. the reason is
that in the broken versions of DUN it would mixup the tcp/ip settings
between the network card and Dialup adapter.
My old notes on this setup are at:
http://www.iav.com/~livingston/faq/win95.html
8)
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>