>Yep,
>
>That was us. I was on the horn with Mark at Livingston. We had just got a
>PM3 chassis, and three 10 port cards. During setup via a terminal bootup,
>the screen just danced with the 0x4 error. He first wanted to ship it back
>DOA, but I remembered about the 74 &75 chipset and I aksed if we could it
>could be the modems. (We were just about to do a net boot) Pulled the
>modems, and voila, I got a prompt.
>
>We upgraded to 3.8.2, then stuck in the cards.
>
>* We already had a problem that Bell South could not bring up our channels.
>This was do to someone had a software loopback on our circuit...
>
>Someday's, ya can't win for losing ; )
>
>
>Randy
>(March 4 1960 - March 4 1999 39 & Holding)
>
>Randy Sigler - Tech Support
>Ziggycom Online
>502.365.1300 - Phone
>502.388.1385 - Pager
>-------------------------------
>* Ziggycom is YOUR Home Town ISP ! *
>
> Ziggycom is dedicated to giving you....
>helpful,friendly,personal service for your
>online experience! We DO INTERNET!
>* Online experience since 1985 *
> http://www.ziggycom.net
>
>
>
>-----Original Message-----
>From: Thomas C. Kinnen <tkinnen@livingston.com>
>To: portmaster-users@livingston.com <portmaster-users@livingston.com>
>Date: Tuesday, March 09, 1999 5:30 PM
>Subject: Re: (PM) Unit status 0x4
>
>
>>Jake Messinger wrote:
>>
>>> We did that. I just wanted to make sure that a 0x4 is DEFINITELY caused
>by
>>> code/modem mismatch.
>>
>>Just heard someone else had that this morning. Not sure if it's
definitely
>>caused by the Modems and code version as other can get the PMs to boot but
>>the modems just do not fire up.
>>
>>--
>>Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
>>[RADIUS Test Engineer] - LUCENT Technologies RABU
>>"All of the opinions stated above are my own and not my employer's,
>>unless they were given to me by my employer"
>>-
>>To unsubscribe, email 'majordomo@livingston.com' with
>>'unsubscribe portmaster-users' in the body of the message.
>>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>