RE: (PM) telnet socket (fwd)
James Courtier-Dutton (dutton@livingston-ent.co.uk)
Wed, 10 Mar 1999 13:54:33 -0000
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of MegaZone
> Sent: Wednesday, March 10, 1999 07:57
> To: PortMaster Users
> Subject: (PM) telnet socket (fwd)
>
>
> Once upon a time Carmine Cozzolino shaped the electrons to say...
> >the telnet socket of PM3 for a single modem unit for at command,
> the telnet
> >socket for PM3 debug , etc etc ... ?
>
> 1. You cannot issue AT commands to PM3 modems.
You can attach to the PM3 Modem, and type AT and get OK back.
You can also do ATDT123444 and dial out, and a few other AT commands.
Not a hugh AT command set, but it does accept AT.
You can set the PM3 to listen on ports (say 6000) and if it receive a telnet
to that port it passes all traffic to the PM3 Modem. Where you can make
outgoing ISDN PRI calls using V120 or Anolog. Incoming does not work.
> 2. There is only ONE PM-3 telnet socket - port 23 by default. That's
> the admin login.
> 3. Please RTFM, you should have known this.
>
> -MZ
> --
> -=*X GOT CLUE? ISPF II - SAN DIEGO, CA 3/6-10
> <URL:http://www.ispf.com/> X*=-
> <URL:mailto:megazone@megazone.org> Gweep, Discordian, Author,
> Engineer, me..
> Join ISP/C Internet Service Providers' Consortium
> <URL:http://www.ispc.org/>
> "A little nonsense now and then, is relished by the wisest men"
> 781-788-0130
> <URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail
> Discordia!
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>