R: (PM) telnet socket (fwd)

Carmine Cozzolino (ccozzolino@alleanzasalute.it)
Wed, 10 Mar 1999 19:59:24 +0100

Yes the command is telnet PM3 , set s0 analog, att s0 , etc etc . But the
questions is the telnet PM3 xxxxx for a direct att to s0 port or to m0 m1 m2
m3 m4 , for a direct dialog whit a modem.

-----Messaggio originale-----
Da: James Courtier-Dutton <dutton@livingston-ent.co.uk>
A: MegaZone <megazone@megazone.org>; PortMaster Users
<portmaster-users@livingston.com>
Data: mercoledì 10 marzo 1999 15.59
Oggetto: RE: (PM) telnet socket (fwd)

>
>
>> -----Original Message-----
>> From: owner-portmaster-users@livingston.com
>> [mailto:owner-portmaster-users@livingston.com]On Behalf Of MegaZone
>> Sent: Wednesday, March 10, 1999 07:57
>> To: PortMaster Users
>> Subject: (PM) telnet socket (fwd)
>>
>>
>> Once upon a time Carmine Cozzolino shaped the electrons to say...
>> >the telnet socket of PM3 for a single modem unit for at command,
>> the telnet
>> >socket for PM3 debug , etc etc ... ?
>>
>> 1. You cannot issue AT commands to PM3 modems.
>You can attach to the PM3 Modem, and type AT and get OK back.
>You can also do ATDT123444 and dial out, and a few other AT commands.
>Not a hugh AT command set, but it does accept AT.
>You can set the PM3 to listen on ports (say 6000) and if it receive a
telnet
>to that port it passes all traffic to the PM3 Modem. Where you can make
>outgoing ISDN PRI calls using V120 or Anolog. Incoming does not work.
>> 2. There is only ONE PM-3 telnet socket - port 23 by default. That's
>> the admin login.
>> 3. Please RTFM, you should have known this.
>>
>> -MZ
>> --
>> -=*X GOT CLUE? ISPF II - SAN DIEGO, CA 3/6-10
>> <URL:http://www.ispf.com/> X*=-
>> <URL:mailto:megazone@megazone.org> Gweep, Discordian, Author,
>> Engineer, me..
>> Join ISP/C Internet Service Providers' Consortium
>> <URL:http://www.ispc.org/>
>> "A little nonsense now and then, is relished by the wisest men"
>> 781-788-0130
>> <URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail
>> Discordia!
>>
>> -
>> To unsubscribe, email 'majordomo@livingston.com' with
>> 'unsubscribe portmaster-users' in the body of the message.
>> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>>
>>
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>