(PM) USR and PM2E

Otto Hoel (ohoel@mfi.net)
Fri, 12 Mar 1999 13:39:51 -0500

Hi,
I need to hook up about 10 USR 33.6 Sportster PnP Faxmodems to our PM2-E-30.
Problem is; I can get the modem to answer the phone, but it will not give me
the PM login. It just sits there.

So... what init string should I use for the USRs? I want to enter this into
the PM with the "add modem..." command. Also how should the dip switches be
set? Can I leave them at the default setting?

My PM port settings are: Modem control enabled, Baudrate 19200, Parity None,
flow control RTS/CTS. No host overrides, Port Type is Login, and Login
Service is Portmaster.

Finally, while fiddlin' with this I added a usr-v34 setting to the PM with
the Add modem command. However, the next day it wasn't there. A show table
modem produced an empty table. The unit was not powered down.

So what am I overlooking? Any ideas?

Otto

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>