Re: (PM) PM3Lines on Slackware and routing problem.

Thomas C. Kinnen (tkinnen@livingston.com)
Tue, 16 Mar 1999 09:40:24 -0800

Brian Hitchcock wrote:
>
> I have a static route setup in the protmaster for this user so it is the
> same if he is dialed in or not. basically just a 0.0.0.0/27 route asigned.
> It has been working for months when he has dialed into an s port. But as
> soon as he dials in the the c0 it will not route. He can go right back to
> the s ports and it will work again.
> The RADIUS entry is just asines him a static ip and a subnet mask of
> 255.255.255.224
> Brian Hitchcock
> KC Web

If you have a static route you want to lose the Framed-Netmask as they can
conflict. Also what does the port config look like. Also since you have
both a framed netmask and a staic route the routing tables may change when
the user is logged in.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>