RE: (PM) Channelized E1 connectivity

James Courtier-Dutton (dutton@livingston-ent.co.uk)
Tue, 16 Mar 1999 20:31:45 -0000

Hello Shibu
Yes, buy a PM3 with an E1 interface instead of a T1 interface and you should
be fine.
The Power supply is autosensing 110/220 Volts.
The USA T1 PM3 does not function on E1. You need the European version of the
PM3 with an E1 port.
Cheers
James

> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Nair, Shibu
> (MED, Wipro Systems, Inc)
> Sent: Tuesday, March 16, 1999 07:17
> To: 'portmaster-users@livingston.com'
> Subject: (PM) Channelized E1 connectivity
>
>
> Hi
>
> Is it possible to configure PM3 (In USA) for channelized E1 connectivity
>
> (Not PRI)...?
>
> So that i will get 30, 64Kbps channels to the EPABX....
> If so how do i configure ?
>
> Regards
> Shibu
>
> With Warm Regards
> Shibu R
> _________________________________________________
> Mailto : Shibu.Nair@med.ge.com
> shibur@wipsys.soft.net
> Tel : (414) 524 5261
> Fax : (414) 896 2790
>
> GE Medical Systems
> Global Service Engineering
> Pewaukee
> Waukesha, WI 53072
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>