Re: (PM) Port Config. Login and Network

Thomas C. Kinnen (tkinnen@livingston.com)
Tue, 16 Mar 1999 18:52:22 -0800

> So, I have tried "set s29 login", using a user which is set up
> for telnet and a host. I can login to that host. When I use
> a Win95 PC and try PPP, using a user which is set up for PPP.
> I get a message back from Win95 stating that it could not start
> a PPP session.
>
> If I "set s29 network dialin", the PPP id works but the Telnet
> do not. The telnet ID just reprompts for a login:.

Try:

Command> set s0 login network dialin
Port type for port S0 changed from Login to User Login/Network(dialin)

This sets the port to both Network dialin and Login

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>