(PM) Port Config. Login and Network

Chuck Shimada (cshimada@netcom.com)
Tue, 16 Mar 1999 18:23:53 -0800 (PST)

I am tring to configure the ports on a PM2e and PM3 to allow both
PPP and Telnet sessions. I have looked in the manual and while not
stating that I can do this, it has not stated I can not either.

So, I have tried "set s29 login", using a user which is set up
for telnet and a host. I can login to that host. When I use
a Win95 PC and try PPP, using a user which is set up for PPP.
I get a message back from Win95 stating that it could not start
a PPP session.

If I "set s29 network dialin", the PPP id works but the Telnet
do not. The telnet ID just reprompts for a login:.

Is the portmaster even capable of doing this?

How are the ISP with one set of dialup numbers allowing both
to PPP and Telnet(Shell) access to occure?

I would be greatful for any advice.

Thanks,

Chuck Shimada
cshimada@netcom.com

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>