Re: (PM) 128K ISDN

John G. Thompson (jgt10@livingston.com)
Fri, 19 Mar 1999 16:54:47 -0800

At 10:59 AM 03/17/99 -0800, Thomas Kinnen wrote:
>Rich Bauer wrote:
>
>> I'm calling a Portmaster 3 with an Adtran 3000 configured for
>> 128K PPP but am only getting a 64K connection. What do I need
>> to do to get 128K ?
>
>Does it try a second channel and it fails? Have you made sure there is not
>a Port-Limit=1 in the users profile? Does a PPP debug on the show the
>second channel even trying to start PPP?

You can setup the PPP debug as follows:

Command> set console
Command> set debug clock on
Command> set debug term on
Command> set debug isdn on
Command> set debug 0x51

JGT
---------------------------------------------------------------------------
John G. Thompson Technical Support STAFF Engineer aka JOAT(MON)

---==####==---Lucent Technologies Remote Access Business Unit---==####==---
4464 Willow Road ftp://ftp.livingston.com/ Tel: (800) 458-9966
Pleasanton, CA 94588 http://www.livingston.com/ Fax: (925) 737-2110
---------------------------------------------------------------------------
******* The solution to any problem lies in its proper definition. *******
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>