> I have a customer with the static IP of xxx.xxx.8.254, if he dials in the
> first 5 PM3s he is fine, if he hunts into the last 6,7,and 8 PM3s he can
> authenticate but not do anthing.
>
> I am assuming that I need to put in static routes into the 6,7,and 8 PM3s.
> What route or routes would be place in the PM3s to let my statics browse
> correctly?
What are you using for a routing protocol? In this case you really need
OSPF. This sounds like a routing issue where if the statics hit the second
block no routing updates get to the other boxes and routes to tell them to
send packets for those addresses to the other boxes.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>