(PM) Multiple Pm2e on same Subnet

Richard Ishmael (richard@networksgy.com)
Tue, 23 Mar 1999 17:09:46 -0300

This is a multi-part message in MIME format.

------=_NextPart_000_007E_01BE754F.F37A5760
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I need to configure two(2) PM2e-30s to use a subnet (64) of a CLASS C, =
which I obtained from my local telco. The first one went OK and I can =
browse the net etc. I have static routes in my routing table pointing =
to that PM. The problem occurs when I add additional routes and try to =
point them to a different PM. Can't browse or ping anything from a =
dial-up, not even the one which was working before.

Any suggestions would be appreciated.

Regards,

Richard

------=_NextPart_000_007E_01BE754F.F37A5760
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

I need to configure two(2) PM2e-30s to use a subnet = (64) of a=20 CLASS C, which I obtained from my local telco.  The first one went = OK and I=20 can browse the net etc.  I have static routes in my routing table = pointing=20 to that PM.  The problem occurs when I add additional routes and = try to=20 point them to a different PM.  Can't browse or ping anything from a = dial-up, not even the one which was working before.
 
Any suggestions would be appreciated.
 
 
Regards,
 
Richard
------=_NextPart_000_007E_01BE754F.F37A5760-- - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: