RE: (PM) dial response

MED, Wipro Systems, Inc ("Nair,)
Wed, 24 Mar 1999 14:27:33 -0600

>Hi
>
>We have setup a T1 (channelized) on PM3...
>We configured Line0 as given below,
>
>---------------------- line0 - T1 Inband DS0
---------------
>
> Status: UP Framing: ESF Encoding: B8ZS
PCM: u-law
>
> Signaling: Trunk E&M wink start
>
> Receive Level: +2dB to -7.5dB
>
> Alarms Violations
> -----------------------------
-----------------------------
> Blue 0 Bipolar
0
> Yellow 0 CRC Errors
0
> Receive Carrier Loss 0 Multiframe Sync
0
> Loss of Sync 0
>Is the above showned configuration is right or wrong ?

Everything looks normal.
>
>I have dialed using a phone to PM3, but iam unable to get the
modem
>tone...
>It is just keeping silent...
>
>Should i get the modem tone when i dialed to PM3 using a
phone?...
>
typically when you dial in with a phone you should here a tone
from the
modem. We had a similar problem a while back and it had to do
with the
number of digits being sent by the telco, I think..

Can you pls let me know exactly what needs to be done... So that i can
request my Telco to do the same... Can you pls try to recollect ?

Regards
Shibu

jer

"On a day no different than the one now dawning, Leonardo drew
the first
strokes of the Mona Lisa, Shakespeare wrote the first words of
Hamlet, and
Beethoven began work on his Ninth Symphony." And Windows98
Crashed!

COMPAQ Class Action Law Suit:
http://members.aol.com/CClass450/index.htm

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>