>Hi
>
>We have setup a T1 (channelized) on PM3...
>We configured Line0 as given below,
>
>---------------------- line0 - T1 Inband DS0 ---------------
>
> Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
>
> Signaling: Trunk E&M wink start
>
> Receive Level: +2dB to -7.5dB
>
> Alarms Violations
> ----------------------------- -----------------------------
> Blue 0 Bipolar 0
> Yellow 0 CRC Errors 0
> Receive Carrier Loss 0 Multiframe Sync 0
> Loss of Sync 0
>Is the above showned configuration is right or wrong ?
Everything looks normal.
>
>I have dialed using a phone to PM3, but iam unable to get the modem
>tone...
>It is just keeping silent...
>
>Should i get the modem tone when i dialed to PM3 using a phone?...
>
typically when you dial in with a phone you should here a tone from the
modem. We had a similar problem a while back and it had to do with the
number of digits being sent by the telco, I think..
jer
"On a day no different than the one now dawning, Leonardo drew the first
strokes of the Mona Lisa, Shakespeare wrote the first words of Hamlet, and
Beethoven began work on his Ninth Symphony." And Windows98 Crashed!
COMPAQ Class Action Law Suit: http://members.aol.com/CClass450/index.htm
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>