Re: (PM) Suggestions for multilink router

Craig Baird (bairdc@xpressweb.com)
Wed, 24 Mar 1999 14:09:42 -0700

So, I'm assuming from this that if I used a PM2 or 2e, I could do
Multilink PPP to our PM3 with more than two modems, right? Is there a
limit as to how many modems you could use on one Multilink connection?

I'm guessing this would work from a PM25 as well, right?

Craig

>
> A PM2 or PM2e would work nice and offer over a two modem connection if
> needed. An OR-M with a modem on S0 and S1 would also work. You can get
> used PM2s or 2Es are some pretty good prices.
>
> --
> Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>