> I'm trying to set up a new PM2, and it seems that the 3rd
> card with 10 ports is not working. When I reset all ports
> they are going first to INITIALIZING and then IDLE, but
> ports from 20 to 29 are going then to USERNAME and there is
> DCD+ . Ports 0-19 have DCD-.
Have you verified the ports are all set the same? Are you using the same
cables? Are the Modems all the same type and configured the same?
Do a 'set extended on' and then a 'show s0' and 'show s19' and compare the
two. Also posting the settings may help see what is going on.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>