> I need to run OSPF and currently have only an OR-HS with 1Mb or ram (can't
> expand, no simm sockets). Will it run without problems?
>
> If I need to get another router what would be recommended as an easy to
> setup unit?
Unless you have an awful lot of routes it will work fine. I have about
100 ospf routes in a box I just looked at. It has 127K free. Here is the
stuff from the box.
or-kadoka> sh mem
System memory 1048576 bytes - 921400 used, 127176 available
1488:0 160:0 144:2 2048:0 1152:0 640:1 176:2 112:1 96:73 80:16 64:8 16:97
128:1 32:301 48:20
System nbufs 800 - 52 used, 748 available
System bbufs 85 - 0 used, 85 available
or-kadoka> sh ses
Port User Host/Inet/Dest Type Dir Status Start Idle
---- --------------- ---------------- ------- --- ------------- ------ ------
S0 - - Log/Net In IDLE 0 0
W1 - 206.85.240.97 Netwrk Hrd ESTABLISHED 14days 0
or-kadoka> ver
Livingston PortMaster Office Router ComOS 3.7.2L
System uptime is 163 days 20 hours 14 minutes
Doug Ingraham You can judge the quality of your life by how often
Rapid City, SD you notice the enjoyment of the little things.
USA
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>