Re: (PM) filtering newuser access

• Messages sorted by: [ date ][ thread ][ subject ][ author ]
• Next message: John Nowack: "(PM) Strohmberg switch help"
• Previous message: Stephen Johnson: "(PM) filtering newuser access"
• Maybe in reply to: Stephen Johnson: "(PM) filtering newuser access"

> TXCOL_PM1> sh filter newuser

You need to have a .in on the filter name. Remember the PM applies .in and
.out to the filter name. Also the .in and .out is to the PMs perspective.

> 1 permit 0.0.0.0/0 x.x.x.c/24 tcp dst eq 80
> 2 permit 0.0.0.0/0 x.x.x.a/24 tcp dst eq 80
> 3 permit 0.0.0.0/0 0.0.0.0/0 udp dst eq 53

> Also, will the maximum ports setting in the PM user allow multiple logins
> for that one username or is that just for port bonding in a single session?

Depends on which RADIUS server you are using. By the RFC it is only bundles
and not login control.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

• Next message: John Nowack: "(PM) Strohmberg switch help"
• Previous message: Stephen Johnson: "(PM) filtering newuser access"
• Maybe in reply to: Stephen Johnson: "(PM) filtering newuser access"