Some modems cannot connect to the PM3's but connect fine to the USR TC's,
and vice versa.
I find it is usually the firmware/line issues that cause the problems
connecting to both types of hardware.
At 05:00 PM 3/26/99 -0600, you wrote:
>
>
>On Thu, 25 Mar 1999, Robert H. Clugston wrote:
>
>> How many people on this list run terminal servers other than Lucent PM's
>> along side their PM3's? How do they compare? Who are the vendors?
>
>I have both USR Total Control units and PM3s.
>
>I have 3.5 TCs and 1 PM3 for modems. I have an additional PM3 for
>ISDN only.
>
>I bought the last two TCs because they were used and much less than a
>PM3. I was considering more PM3s until I found the used TC racks.
>
>The PM3 is still running 3.7.2c3, and I don't have any disconnect problems
>with it. I also have V.90 on the TCs and only a minimal number of
>disconnect problems.
>
>Brian
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>