> > >have PMVision and there is a section, under Configure/Global to
> > insert an IP
> > >address for "reported IP address".
> This is so, if you have more than one PM, the client dialing in sees them
> all as one.
> This is also required for Multi Chassis MP.
Two things to note here. First Multi Chassis MP does not work on the PM2
series. Second you may needs to set this for older clients that require the
gateway defined (Older trumpet, Internet in a box, etc..)
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>