Some time ago a person from Lucent wrote on
this list that V.110 is planned to be supported
with the 56k modem cards (it is supported on
the old modem cards) and I wanted to know
if it could be possible that one would need the
1675 DSP for future V.110 support??
Christian
At 02:08 AM 3/30/99 -0800, you wrote:
>Once upon a time Christian Schmit shaped the electrons to say...
>>Is it possible that there can be new features
>>in the modem code for the pm3 that will only
>>be supported with the new DSPs' ?
>
>Possibly, but near as I can tell doing some extensive searching on the
>Lucent website, the 1675 is a direct evolution of the Venus DSP1675 and not
>a departure. Seems like just a brush up - DSP technology evolves rapidly.
>
>The new big gun is the 16000 series, which I believe is in development for
>the next-generation modem cards in the PM-4. If I understand what I've
>read well enough, they can do 3-4 modems per DSP and have onboard memory
>instead of requiring external RAM chips.
>
>-MZ
>--
>-=*X I'm going down... under that is! <URL:http://www.aussie-isp.net/> X*=-
><URL:mailto:megazone@megazone.org> Gweep, Discordian, Author, Engineer, me..
>Join ISP/C Internet Service Providers' Consortium <URL:http://www.ispc.org/>
>"A little nonsense now and then, is relished by the wisest men" 781-788-0130
><URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail Discordia!
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>