> here is my dial-out configuration:
> --------------------------------------------------------------
> Location: work Type: Manual
> Destination: XXX.AAA.BBB.CCC Netmask: 255.255.255.0
> Protocol: PPP Options: Quiet, Compression
> Group: 0 Max Ports: 1
> Idle Timeout: 0 minutes High Mark: 0 bytes
> Mtu: 1500 Async Map: 00000000
>
> Dial Script: Send Command Wait for Reply
> -------------------- -----------------
> atdtxxyyzzppoo CONNECT
> \r ogin:
> utilisa\r assword:
> motpasse\r
If the remote site supports PAP or CHAP don't try the script and enable
PAP/CHAP.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>