I had look in all the list archive and documentation and couldn't
understand what is wrong
I use a Portmaster 3 with ComOs 3.8
here is my dial-out configuration:
--------------------------------------------------------------
Location: work Type: Manual
Destination: XXX.AAA.BBB.CCC Netmask: 255.255.255.0
Protocol: PPP Options: Quiet, Compression
Group: 0 Max Ports: 1
Idle Timeout: 0 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000
Dial Script: Send Command Wait for Reply
-------------------- -----------------
atdtxxyyzzppoo CONNECT
\r ogin:
utilisa\r assword:
motpasse\r
--------------------------------------------------------------
so when i type:
dial work -x
No dial script available for work
When I use a phone number, username an password the dial is
done but no login script is sent to the remote ppp server...
I am lost
Can some home help me?
MD
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>