> I had some problems with US Robotics Sportster v90 External and
> Portmaster 2.
> When I configure the modem type in portmaster, the connection between
> Client and Portmaster never is more than 33,600 bps. So I look for other
> init string, but no one work.
56K connection require one side of the connection be a digital connection.
You can not plug standard external modems into a PM2 and get > 33.6K dial in
(You can get outbound at 56K if you dial a digital NAS). There are some
modem racks that are BRI, CT1 or PRI feed that will work but you are better
off normally with a solution like the PM3 or PM4 for dial in access at 56K.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>